10th anniversary limited edition.

For Zorg Effect's 10th anniversary I've worked with artists to create limited editions designs of my pedals. Each pedals comes with a framed A4 print. This Blow! drawing has been made by Chloé Gioberti.Only five numbered pedals are available.

Plug your condenser or dynamic mic
into guitar pedals!

The Blow! is a preamp for static or condenser mics with a jack effect loop for guitar effects pedals. If you're a singer, saxophone player, trombone or trumpet player, etc. the Blow! will allow you to experiment with guitar pedals without loss in your sound quality.

Guitar pickups being more powerful than dynamic or condenser mics, the preamp part allows to attack the guitar pedals with the same level as a guitar’s pickup. The XLR in and out and the optional phantom power makes this pedal very similar to a direct box but added a preamp and an effect loop.

To use guitar pedals with condenser or dynamic mics, the temptation would be great to simply use a XLR-> Jack plug adapter. But even if it can work, one can then get a lot of problems to solve: loss of signal quality due to impedance mismatch, noise issues, bad behaviour of the pedals due to the mic's very low signal output.

Because of its XLR in and out connexions the Blow! allow to keep all the advantages of a balanced line while sending to the pedals a signal as powerful as an electric guitar thanks to its high quality preamp and effect loop.

This pedal goes with:
- A phantom power for condensers mics. On versions made until April 2022 it could be added later if you didn't think you'd use it in the first place. If you whish me to mount it later, please contact me. If you feel like your can mount it yourself, there's a DIY kit!
- A bypass footswitch to bypass all the effect loop in one click. This footswitch can also be internally programmed to be a mute instead of the bypass

Reviews: